SHENGHANG 0086 311-66105793

SHENGHANG 15076176199

Roofing Bolt&Nut

Hex Flange Nut

Product category: Fasteners/Bolt&Nut

Measurement system: Metric, Imperial (Inch)


OEM: Accetable

Surface treatment: Plain

Contact Supplier
  • Information

    Roofing Fastener Suppliers,Roofing Fastener Manufacturer,Fastener factory


    Shenghang is one of the leading suppliers of roofing fasteners in China. The company manufactures a wide range of fasteners for both commercial and residential applications. Shenghang also offers a wide range of services, including design, installation, and maintenance.


    Shenghang has a team of experienced and knowledgeable staff who can assist you with all your roofing fastener needs. The company's products are backed by a 100% satisfaction guarantee. Shenghang is committed to providing the highest quality products and services to its customers.




    what is a hex flange nut?


    A hex flange nut is a type of fastener used to create a bolted joint. The nut has a flange on one end that acts as an integrated washer, which distributes the load over a larger area. This type of nut is often used in applications where it is not possible to use a standard nut and washer combination. 

    Hex flange nuts are available in a variety of sizes and material grades. The most common material grade is grade 8, which is made from low carbon steel. Grade 8 hex flange nuts have a tensile strength of 150,000 psi and are commonly used in automotive and construction applications.




    How to identify a hex flange nut


    Hex flange nuts are one of the most commonly used types of nuts. They are often used in construction and machinery applications. There are several ways to identify a hex flange nut. 

    The first way to identify a hex flange nut is by its six sided shape. These nuts have six flat sides that come to a point at the top and bottom. The second way to identify a hex flange nut is by the raised portion or “flange” on the top of the nut. This raised portion is wider than the body of the nut and helps to distribute weight and pressure evenly. 


    Hex flange nuts are available in a variety of sizes and materials. The most common material is steel, but they can also be made from brass, stainless steel, or nylon.




    Advantages of using a hex flange nut


    There are many advantages to using a hex flange nut. They are easy to install and remove, and they provide a tight, secure fit. Hex flange nuts are also less likely to loosen over time than other types of nuts. 

    Another advantage of hex flange nuts is that they can be reused many times without losing their shape or strength. This makes them an economical choice for applications where parts need to be frequently replaced or repaired. Hex flange nuts are also corrosion-resistant and have a smooth, finished look.




    How to install a hex flange nut


    Most hex flange nuts are installed using a socket wrench. However, some may need to be installed with a box wrench or an open-end wrench. Before starting, make sure that the nut is the correct size for the bolt. 

    To install a hex flange nut:


    1. Insert the bolt into the hole and thread it through until the flange is flush with the surface.


    2. Place the socket over the flange and turn it clockwise to tighten the nut. 

    3. Continue turning until the nut is tight against the surface.

    4. Repeat this process for all of the hex flange nuts on your project.




    Customized Hex Flange Nut


    Hex flange nut is a nut with a hexagonal recess in the top and a chamfered edge around the circumference. The recess allows a wrench to be fitted to it, providing more torque than can be applied with a screwdriver. Hex flange nuts are available in both standard and metric sizes. They are used in applications where high torque is required or where vibration could loosen a normal nut.




    Hex Flange Nut


    A hex flange nut is a type of nut that has a hexagonal shaped head and a flange on the underside. This type of nut is used in applications where a high amount of torque needs to be applied. Hex flange nuts can be found in a variety of materials, including steel, brass, and aluminum.




    Hex Flange Nut FAQs


    1. Are you a Hex Flange Nut  manufacture?


    Yes, SHENGHANG is a roofing fastener factory, manufacturer and supplier of Hex Flange Nut .


    We mainly produce all kinds of screws, anchors, bolts and nuts, waterproof liquid PU film, PVC waterproof coil and so on.



    2. What is the lead time for Hex Flange Nut ?


    It takes 7-10 days to stock products. For bulk orders, depending on the order quantity will be within 30-60 days.



    3. How do we order Hex Flange Nut?


    Just in our query on a page or send email to

Related products

Shandong Shenghang TECHNOLOGY CO.,Ltd